What To Do If Your Water Heater Unexpectedly Stops Working
What To Do If Your Water Heater Unexpectedly Stops Working
Blog Article
Just about every person has got their own opinion with regards to No Hot Water — Water Heater Repair.
Many modern homes use an electrical hot water heater for their heating system, because of its comfort and also convenience of use. However, much like any other electric devices, problems may occur with its use, all of a sudden. It can be really aggravating to get up to a chilly shower as opposed to a warm one or having your bath with water that isn't hot enough and even as well warm. Whatever the instance might be, hot water heater problems can be quite stressful. Thankfully, we have actually made a listing of feasible remedies to your water heater concerns. There are a variety of variables that can create most of these troubles, maybe an issue with the power supply, the electrical heating element, or the thermostat. Before doing anything, ensure you turn off the main power supply for safety. Whatever the problem is, getting it fixed should not position too much of an issue if you follow these actions:
Examine Your Power Supply:
As standard as this might appear, it is really needed. Without appropriate power, your hot water heater will certainly not work. So the first thing to do when your water all of a sudden stops working is to confirm that it isn't a power problem. Check if the fuse is burnt out or the breaker stumbled. If the breaker is the problem, just turn it off and on again. Change any kind of damaged or worn-out fuse. Evaluate the appliance with power after these changes to see if it's currently functioning.
Inspect the Heating Element in the Water Heater:
If it's not a power problem, after that attempt taking a look at your heating element if it is still functioning. Check each of your burner to make sure the problem isn't with any one of them. If any one of them is defective, replace that component and afterwards inspect whether the hot water is back on.
Examine Your Thermostat:
If your hot water heater still isn't working or the water appearing isn't warm enough, you may require to inspect the temperature setups on your top thermostat. Guarantee the breaker is turned off before doing anything. Open the accessibility panel as well as press the red button for temperature level reset above the thermostat. This should aid heat up the water. Turn the breaker back on as well as check if the trouble has been resolved.
Call An Expert:
If after changing all defective components as well as resetting your temperature, the hot water heater still isn't working, you might require to contact a specialist plumber for an expert point of view. The issue with your heater could be that the cold and hot taps have actually been changed or it might be undersized for the amount of warm water needed in your house. Whatever the situation may be, an expert plumber would assist solve the issue.
Conclusion
Hot water heater problems are not constantly major. Much of them result from minor concerns like a blown fuse or worn-out burner. Replacing the damaged parts must do the trick. Nevertheless, if you are still unable to fix the trouble, give a call to your closest plumber ahead to get it repaired.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
I ran across that entry about Hot Water Heater Repair while doing research the search engines. Sharing is nice. Helping others is fun. I love reading our article about No Hot Water — Water Heater Repair.
Schedule Your Job Now
Report this page